https://medium.com/@epabrego/1-micropython-esp32-max31865-rtd-pt100-9e9c02e2b55d Muchas veces se necesita un termómetro que brinde muchas posibilidades de configuración, en esta oportunidad vamos a realizar uno que permite un amplio espectro de utilidades, el mismo lo…
https://github.com/nimaltd/max31865 MAX31865 Library http://www.github.com/NimaLTD https://www.instagram.com/github.nimaltd/ https://www.youtube.com/@nimaltd This is the MAX31865 STM32 HAL Library Based on https://github.com/adafruit/Adafruit_MAX31865 How to use this Library: Select "General peripheral Initalizion as a pair of '.c/.h' file…
https://github.com/AlphaLima/ESP32-Serial-Bridge ESP32-Serial-Bridge Transparent WiFi (TCP) to all three UART Bridge, supports both AP and STATION WiFi modes. The .ino file is the code for the ESP32. Use Arduino IDE for…
https://github.com/martin-ger/esp32_nat_router ESP32 NAT Router with WPA2 Enterprise support This is a firmware to use the ESP32 as WiFi NAT router. It can be used as Simple range extender for an…
https://www.barbouri.com/2018/03/31/prototype-i2c-display-board-with-eeprom/
https://www.barbouri.com/2019/08/17/battery-capacity-tester/
https://www.barbouri.com/2019/08/07/millivolt-meter-version-2/
https://www.barbouri.com/2020/11/06/4-20ma-current-transmitter/#more-1905 Building a 4–20mA current transmitter and receiver for some upcoming automation projects. After a bit of online searching for a precision 4–20 mA circuit tester, I decided to build…
https://www.barbouri.com/2020/11/07/4-20ma-current-receiver/#more-1939 Building a 4–20mA current transmitter and receiver for some upcoming automation projects. After building the 4–20mA current transmitter, it was time to build a receiver. I used the…
https://www.barbouri.com/2022/03/29/updating-the-programmable-voltage-reference-project/ After five years and a few prototype revisions of the Version 2.12 Programmable Voltage reference, I decided it was time to update the project based on many requests and lessons…